ines for recycling waste oil into diesel oil, diesel production line, oil recycling chain. Tire recycling chain oil into diesel, gasoline, kerosene. China imported equipment
Chain as raw material for waste oils such as motor oil, oil from recycled tires, crude oil .... modern production processes for the advanced diesel quality, in addition to longer split gas line , kerosene from crude oil.
Raw materials suitable for the line:
No.
Raw material
Noted
1
Waste motor oil
Complete liquid oils are used, differing only in the composition of oil is obtained.
2
Oil recycling tires
3
Oil recycling plastic
4
Crude oil waste
5
Oil burning
6
Heavy oils
7
Lubricating oils
The machine size and power:
No.
Model
Capacity / day
Machine weight
Power Cs
1
5
5 MT / D
25000kg
22KW
2
10
10 MT / D
30000kg
22KW
3
15
15 MT / D
38000kg
30KW-grade
3
20
20 MT / D
42000kg
30KW-grade
4
30
30MT / D
50000KG
40kW
Fuel operating equipment
No.
Fuel Name
Noted
1
Charcoal
/
2
Wood, wood
/
3
Heavy oil
Use Burners
4
Heating oil
5
Natural gas
Using gas burners
6
Electricity
Using electric bar heater
Percentage of recalled products
Eg for engine waste oil (water content not exceeding 5%)
Diesel oil
Oil
Gasoline
Gas
Heavy oil
75%
8%
7%
5%
5%
Installation
Manufacturers provide equipment foundation drawings after receiving the order. Provide instructions for installation engineers and trained operators.
Parties manufacturing plant worker salary costs. BUYER cost fare, accommodation travel and translation.
- Installation required 25 ~ 30 days, depending on the actual status and performance.
The average installation time of 25 days. Installation time can not exceed 35 days.
Installation area:
Equipment installation area to 1600m2 (40m long 40m wide)
Number of operators:
The number of workers need 1 person / shift
The formula additives
Party supply manufacturing formula additives when ordering. The use of additives was purchased locally. Additives to improve product quality and reduce oil smell.
Economic calculations (eg material as waste motor oil)
Because this calculation spreadsheet calculated the price of raw materials, labor, electricity price at which manufacturing parameters should be skewed over the unit, labor and electricity use site.
Table calculation formulas given, the user needs to replace the values for individual results.
For example: 10 tons of waste oil / day (mode of operation of the machine is fully automatic, continuous)
Inputs:
10 tons of waste oil = 750 usd / ton * 10tons = 7500usd.
= 800kg fuel than * 150 usd / ton = $ 120.
Fuel can replace wood, oil ... prices using the price equivalent coal
Electricity consumption = 22Kw / h * 0.25usd / kW * 24 = 132usd.
Of workers = 2 * $ 30 / day / 1 workers = $ 60.
Additives for 20 usd / day = 25usd.
The total daily input costs = 7500 + 120 + 132 + 60 + 25 = 7837usd.
Output:
Diesel oil = 75% * 10 tons of raw oil = 7.5tan * 1250usd / t = 9375usd.
Oil = 8% * 10 tons of material = 0.8ton * 1100usd / t = 880 usd.
Gasoline = 7% * 10 tons of material = 0.7tan * 1350usd / ton = 945usd.
Daily revenue = 9375 + 880 + 945 = 11200usd.
Daily Profit: 11200usd-7837usd = 3363 usd.
Monthly profit: 25 days * 3363 = 84 075 usd.
Profit years: 84 075 USD * 10 months = 840 750 usd.
Delivery: 20 ~ 30 days after receipt of deposit.
Warranty: 1 year warranty.
Fabricated materials: steel Q245R and Q345R steel is especially used in boilers, heat resistance of 700 ° C.
In case of device malfunctions when operating properly manipulate (excluding detailed abrasive wear) manufacturers send engineers to thoroughly treat free for 1 year.